124 Spider Alignment Specs

This section is a bulletin board for your Fiat club
Post Reply
THEFIAT
Posts: 3
Joined: Sat Sep 08, 2018 10:12 am
Your car is a: 1980 Fiat Spider 2000

124 Spider Alignment Specs

Post by THEFIAT »

My 1980 Fiat Spider 2000 is set up with the Whoa Brake package, the upsized 22mm Front Sway bar (same as the last Pininfarina Azzura, I believe), and 205-50 /15 tires.

I have been burning the inner edges of the tires, and need to correct the front alignment. :(

I am in the process of removed the battering ram bumpers, in favor of the aftermarket version of the original OEM spider chrome (no over-riders) mounted on the 1980's bumper shocks.

Need advice on proper alignment specs for this setup.
I do not have the 1985 alignment spec (haven't found it!)

Any assist and learned advice greatly appreciated.

Jon Boyd
[THE FIAT]
tima01864
Patron 2021
Patron 2021
Posts: 702
Joined: Thu Jan 12, 2012 8:01 pm
Your car is a: 1983 FIAT Pininafarina Spider 2000
Location: Wilmington, MA

Re: 124 Spider Alignment Specs

Post by tima01864 »

Log in create an account with Mirafiori look in the library you will have good luck finding the specs
THEFIAT
Posts: 3
Joined: Sat Sep 08, 2018 10:12 am
Your car is a: 1980 Fiat Spider 2000

Re: 124 Spider Alignment Specs

Post by THEFIAT »

I've tried that, but do not find anything there related to the later model Pininfarina Azzura Spider, which had the stiffer front stabilizer bar.
Post Reply