Sagging driver's seat , cheap fix

Keeping it sharp - paint, wax, detailing, etc.
Post Reply
maxdog
Patron 2019
Patron 2019
Posts: 126
Joined: Thu Jul 07, 2016 11:27 pm
Your car is a: 1979 spyder 124
Location: Montreal Quebec Canada

Sagging driver's seat , cheap fix

Post by maxdog »

My driver's seat cushion was sagging badly because the webbing suspension strap across the seat base had disintegrated . The foam rubber cushion was still in good shape so I tried to find a replacement for the strap . .The only rubber webbing I could find was not strong enough . I replaced it with 3 inch wide wooden slats made from 1/4 inch ply . I used two slats across the seat bottom supported on three sides by the base with a third slat running fore and aft across the mid point of the base .
I now have a firm driver's seat base cushion.
Maxdog
User avatar
geospider
Patron 2020
Patron 2020
Posts: 585
Joined: Mon Mar 20, 2017 9:07 pm
Your car is a: 1979 Spider 2000
Location: concord, ca

Re: Sagging driver's seat , cheap fix

Post by geospider »

great idea. plexiglass should work as well. wondering how thick; need/want some spring. a new project; but motor first
geo
maxdog
Patron 2019
Patron 2019
Posts: 126
Joined: Thu Jul 07, 2016 11:27 pm
Your car is a: 1979 spyder 124
Location: Montreal Quebec Canada

Re: Sagging driver's seat , cheap fix

Post by maxdog »

My system allows you to fix the seat base without dismantling the seat . I managed to wiggle the 10 1/2 inch long x 3 inch wide 1/4 inch thick plywood strips into place through the hole in the base . Seat fixed at zero cost !
Cheers
Maxdog
Post Reply