Seat tracks - philips screws or bolts?

[bluespider262]

Hi,

I'm working on undoing PO's bad choices.

Should the fasteners for the seat tracks to the floor pan be machine bolts with philips heads or regular hex head metric bolts? I have two philips machine screws in the front, one bolt in the rear that appears to be wrong, and one corner with no fastener at all. I think the odd bolt in the rear is limiting the rear travel a bit and if I could get another inch or two that would be great.

[JEEPER]

1979 ALL PHILLIPS HEADS FROM FACTRY.

[vandor]

Phillips head ones available new. Later Spiders had allen-head bolts, but they are interchangeable.

https://www.autoricambi.us/product/RI9- ... crews-Set/

[azruss]

I replaced all mine with allen head bolts

[4uall]

same, found it way easier to access bolts

[bluespider262]

Thanks guys!