How to remove electric horns RESOLVED

[4uall]

Can anyone tell/show me step by step on how to remove these? My man hands seem to be getting in my way. Not looking to pull the rad unless necessary Thanks

Was able to pull grill out. (sorry no new photos of horns)


Freshly painted upper grill by itzebtze, on Flickr


Newly painted grill installed by itzebtze, on Flickr

I did find this soooooooooo looks like I may have to remove the rad after all
http://www.fiatforum.com/spider/142322- ... relay.html

[SunnySideUp]

I was able to pull my factory horn set by only removing the grill. It helps to have some u-joint socket knuckles and an extension bar. I think pulling the radiator is a bit extreme. If it's space you need I'd go for pulling the bumper as it's straight forward and a lot "lower risk." You could also loosen the hood hinges and nudge the front edge of the hood out of the way a bit -- put a couple of pencil alignment marks on the hinge placement BEFORE you start unbolting things if you go this route.

[4uall]

Thanks, I will have to give it another try I guess I was all full of Turkey over our Thanksgiving weekend Ironically I do indeed have all new rubber hoses to put in however, I was going to do that in the spring

[4uall]

MUHAHAHAHAHAHAHAHA



32yr old horns







After attacking these with a never give up attitude and a clear head, success was had. Was finally able to get my man hands in there and get a 10mm wrench on the nut after applying lots of penetrating oil. The new horns are super loud and I look forward to getting to use them in traffic (when needed).