Gear Reduction Starter vs. 95 amp Alternator

Make it go fast! Kick it up a notch. Post tips in here.
Post Reply
User avatar
Zoofly
Patron 2020
Patron 2020
Posts: 129
Joined: Thu Feb 15, 2018 4:14 pm
Your car is a: 1978 Fiat 124 Spider
Location: Los Angeles, CA

Gear Reduction Starter vs. 95 amp Alternator

Post by Zoofly »

Hi,
I'm looking for some advise. I have a limited budget to work with on my Spider and I'm upgrading things slowly but steadily. I want to know what would be a bigger bang for my buck between the gear reduction starter vs. the 95 amp alternator. Which one should I get first? Could be another year before I get the second one.

Thanks!
2020 124 Spider Abarth
2019 Alpha Romeo Stelvio - sold
1977 Triumph Spitfire
2017 Fiat 124 Spider Classica - sold
1999 Jaguar XK8 - sold
1998 BMW Z3 - sold
1988 Pontiac Fiero - sold
User avatar
dinghyguy
Patron 2018
Patron 2018
Posts: 457
Joined: Thu Jul 20, 2017 7:41 pm
Your car is a: 1981 spider
Location: Vancouver, Canada

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by dinghyguy »

i have neither.....so consider my opinion accordingly.

If you have lots of load on your electrics due to extra lights, a fancy sound system or ??? then the alt would be useful. If not and if you have relays for the wipers (not really needed much in your town perhaps) and the lights and the starter then i would first get the starter.
The starter should make the car start easier and thus improve your reliability somewhat and even more importantly your enjoyment. I do assume the current draw for the new starter is less than or equal to the existing starter. If it is higher, all the more reason to make sure you have a relay system for the starter.
my 0.02$ worth.
dinghyguy
1981 Red Spider "Redbob"
1972 blue Volvo 1800ES "Bob"
1998 Red Ford Ranger
JohnMc
Patron 2018
Patron 2018
Posts: 226
Joined: Mon Aug 10, 2015 8:30 pm
Your car is a: 1970 Fiat 124

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by JohnMc »

Personally I would get the gear reduction starter. I love mine. Much lighter, faster turning and they say takes less juice to run.
I also installed a relay to the starter so that the current does not go through the ignition switch.
but if money pretty tight I would just put in the relay to the existing starter.
The top bolt that holds the starter in place can be a bugger - I got out by having probably over 2 feet of extension on swivel. Some other people have recently put down what lengths of extension they used.
JohnMc
Patron 2018
Patron 2018
Posts: 226
Joined: Mon Aug 10, 2015 8:30 pm
Your car is a: 1970 Fiat 124

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by JohnMc »

In the Electrical Issues section there is a discussion on removing the starter - right now 5th one down.
I cannot remember and may have had to remove the center steering section to get it out the bottom.
User avatar
joelittel
Patron 2018
Patron 2018
Posts: 1013
Joined: Tue Mar 08, 2011 6:53 pm
Your car is a: 1980 Spider 2000 FI
Location: Evanston, IL

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by joelittel »

I have done both.

If you go with the amp I’d put relays in at the same time. I can’t say that I noticed a difference when I put my amp upgrade I n but it was intended as preparation for better lights, stereo, device charging docks and accessory ports. (However these days better lighting usually involves LEDs which probably require less juice than the stock bulbs do.) The amp will not make your wipers work better unless you refurbish your wiper linkage and/or motor first.

The gear reduction starter was intended for increased reliability and spousal trust. If my car were to ever leave my wife stranded rebuilding her trust in the car could prove to be very difficult.

I have no complaints with either and do not recall which one I choose to upgrade first.
DieselSpider
Posts: 2130
Joined: Wed Dec 24, 2014 10:21 pm
Your car is a: 1978 124 Spider with Isuzu Turbo Diesel

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by DieselSpider »

Before adding more amperage or spending money on other new components take all the direct loads off the ignition switch by putting in relays for the Starter, Lights, Wipers, etc and clean up all the ground pods under the hood and dash. The relays will likely save you the grief or having to replace the ignition switch or potentially that new expensive starter in a few months which puts up to a additional 10 amp load on when you power the starters solenoid. The gear reduction reduces load on the starters main lug which is directly powered from the battery cable while the solenoid will pull more current through the ignition switch in order to be able to hold the starter drive gear engaged with the flywheel against the extra torque from the gear reduction.
User avatar
aj81spider
Patron 2020
Patron 2020
Posts: 1526
Joined: Fri Mar 11, 2011 9:04 am
Your car is a: 1974 Fiat 124 Spider
Location: Chelmsford, MA

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by aj81spider »

If your car is working and both are functional, why replace either - spend the money somewhere else.

I violated that rule and replaced both. However my engine was out and I was rebuilding the whole car. I replaced the starter because I wanted a new one that would outlast me, and I never wanted to have to change it with the engine in the car. I replaced the alternator in case I increased the loads on the electrical system (I never really did and the alternator has had to be replaced once since I put the 95 amp in, so perhaps I should have kept the original).

If your heart is set on doing one of those and both are currently working fine I would do the starter first. It's the harder job, but it makes future maintenance easier and starting the car more reliable. Replacing the alternator is easy, so if it ever breaks getting your car back on the road is a much simpler affair.
A.J.

1974 Fiat 124 Spider
2006 Corvette
1981 Spider 2000 (sold 2013 - never should have sold that car)
scrapironchef
Posts: 155
Joined: Thu Jul 16, 2009 3:06 pm
Your car is a: 79 Spider
Location: Richmond, CA

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by scrapironchef »

aj81spider wrote: If your heart is set on doing one of those and both are currently working fine I would do the starter first. It's the harder job, but it makes future maintenance easier and starting the car more reliable. Replacing the alternator is easy, so if it ever breaks getting your car back on the road is a much simpler affair.
I have to agree with this reasoning, I've done both also, the alternator is a half hour job from the top of the engine, the starter requires getting underneath and a lot more work.
User avatar
RRoller123
Patron 2020
Patron 2020
Posts: 8179
Joined: Sun Nov 13, 2011 2:04 pm
Your car is a: 1980 FI SPIDER 2000
Location: SAGAMORE BEACH, MA USA

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by RRoller123 »

+1 agreed.
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
User avatar
Zoofly
Patron 2020
Patron 2020
Posts: 129
Joined: Thu Feb 15, 2018 4:14 pm
Your car is a: 1978 Fiat 124 Spider
Location: Los Angeles, CA

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by Zoofly »

I like the sound of making the car more reliable. The reduction starter wins out over the 95 amp alternator in that respect. I really appreciate the feedback. Thanks to all who replied!
2020 124 Spider Abarth
2019 Alpha Romeo Stelvio - sold
1977 Triumph Spitfire
2017 Fiat 124 Spider Classica - sold
1999 Jaguar XK8 - sold
1998 BMW Z3 - sold
1988 Pontiac Fiero - sold
User avatar
chrisg
Posts: 746
Joined: Sun Jun 04, 2006 7:30 am
Your car is a: 1971 FIAT

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by chrisg »

can't state too emphatically that whichever you do, make sure that you've addressed grounds, connections, and any other glitchy electrical issues in the car. Both are nice upgrades if they suit a purpose (more amperage needed, weight reduction, less draw on starts, whatever), but they should be upgrades done once the systems are ensured to be sound.
Chris Granju
Knoxville, TN
'71 FIAT 124BS (pretty), '72 FIAT 124BC,'76 FIAT 128 Wagon(ratbeast), '85 Bertone X 1/9, '70 124BC (project), 79 X1/9 (hot rod in rehab), '73 124BS (2L, mean), '74 124 Special TC, '73 124CS, '73 124 Familiare
FLGordie
Posts: 46
Joined: Sun Aug 07, 2016 1:06 pm
Your car is a: 1980 Fiat 124

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by FLGordie »

I did both. Do the starter. Hands down it has been the most pleasing repair to the car. The sound, the quick start, the reliability.... it is mint. While my car does not accelerate, shift, brake, or steer straight, man, the starter is a Rock Star.
FLGordie
Posts: 46
Joined: Sun Aug 07, 2016 1:06 pm
Your car is a: 1980 Fiat 124

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by FLGordie »

I did both. Do the starter. Hands down it has been the most pleasing repair to the car. The sound, the quick start, the reliability.... it is mint. While my car does not accelerate, shift, brake, or steer straight, man, the starter is a Rock Star.
MIGHTY 8
Posts: 307
Joined: Sat Mar 04, 2006 9:55 pm
Your car is a: 1980 Spider
Location: North Chatham NY

Re: Gear Reduction Starter vs. 95 amp Alternator

Post by MIGHTY 8 »

FLGordie wrote:I did both. Do the starter. Hands down it has been the most pleasing repair to the car. The sound, the quick start, the reliability.... it is mint. While my car does not accelerate, shift, brake, or steer straight, man, the starter is a Rock Star.

:D :D
Post Reply