Bumper Removal

Keeping it sharp - paint, wax, detailing, etc.
TX82FIAT
Posts: 1814
Joined: Mon May 03, 2010 11:04 am
Your car is a: 82 Fiat Spider 2000 CSO
Location: San Antonio

Re: Bumper Removal

Post by TX82FIAT »

I'm going to join the no bumper crowd. I'll have the lighting (turn signal and parking lights) squared away next week with the fiberglass inserts and Harley lights with a chrome bezel. Thanks to Grittracing. Chrome TBARS in front and back bolted in. Hope to have all the parts before I get busy at work again. There is a large black rubber grommet around the TBAR in the oval hole that is blacked out in the pick. I'll post picks front and back once complete. The gas tank was taken down to about 3 gallons and moved to the side using a 2Ft By 2Ft piece of ply wood, a Couple 2X4 and a car jack. Really need to make sure you have enough slack in filler neck and slight move of gas tank to access rear shock bolt is easy once you take off the four gas tank nuts.
https://1drv.ms/f/s!AmB6hJa_3mINg0XIGnwcSSZxepQj
Buon giro a tutti! - enjoy the ride!

82 Fiat Spider 2000
03 BMW M3
07 Chevy Suburban
Post Reply