1976 Ignition Switch Connection Markings

velozi · Post by **velozi** » Tue Oct 23, 2012 10:08 am

Ordered a 1976 ignition switch from IAP and it came with no markings. The black plastic on mine was smooth in contrast to the one in this photo that was reused from another discussion.

Original one on left and the IAP type on right. Hope this helps in case you receive an unmarked unit.

124Germ · Post by **124Germ** » Tue Oct 23, 2012 4:10 pm

Any idea what color wires go on the switch on the right. I went to pull the sheathing back and all the wired disconnected from the back of the switch. I have the book and wiring diagrams but they are too confusing to understand. If anyone has a picture or knows where each wires goes, I could use it.

Thanks
Jeremy

4uall · Post by **4uall** » Tue Oct 23, 2012 4:14 pm

This might help http://www.fiatspider.com/f08/viewtopic ... &sk=t&sd=a

divace73 · Post by **divace73** » Tue Oct 23, 2012 5:53 pm

it is really worth considering cleaning up the original, they are constructed much better than the newer units. Shame your connection for the bell has been cut, I use this for my ACC position for my radio.

http://www.mirafiori.com/faq/content/switch/index.html

vandor · Post by **vandor** » Wed Oct 24, 2012 1:06 am

Why not call the vendor and ask for the instructions?

1976 Ignition Switch Connection Markings

1976 Ignition Switch Connection Markings

Re: 1976 Ignition Switch Connection Markings

Re: 1976 Ignition Switch Connection Markings

Re: 1976 Ignition Switch Connection Markings

Re: 1976 Ignition Switch Connection Markings