Is there a tool for disconnecting the electrical connectors without damage? I started blasting and painting some parts, and would like to do the headlight buckets too.
Thanks,
Derek
Wire connector tool
-
Danq
- Posts: 43
- Joined: Thu Jun 09, 2011 11:07 pm
- Your car is a: 1981 2000 Spider
- Location: North East Ohio
Re: Wire connector tool
Derek,
A small flat tip screw driver can be used to release the terminal in the headlight connector. there is a smaller slot opposite of the slot for the head light spade terminal. insert the screw driver into this slot and gently press on the tang of the contact.
For other types of connectors this tool is what you need.
http://www.tooltopia.com/lisle-56500.aspx
A small flat tip screw driver can be used to release the terminal in the headlight connector. there is a smaller slot opposite of the slot for the head light spade terminal. insert the screw driver into this slot and gently press on the tang of the contact.
For other types of connectors this tool is what you need.
http://www.tooltopia.com/lisle-56500.aspx
Dan
1981 spider 2000
1981 spider 2000