redone chassis shim.

azruss · Post by **azruss** » Sun Aug 18, 2013 9:21 pm

Here is your sunday picture fix. redid my crossmember shim. the original fix showed me it made the right adjustment. Now it was time to do it right.

v6spider · Post by **v6spider** » Mon Aug 19, 2013 12:18 am

Absolutely brilliant! I feel lucky that my spider doesn't have any frame issues. This will be a great reference for those that need a guide to fix this issue.

Rob

RRoller123 · Post by **RRoller123** » Mon Aug 19, 2013 3:08 am

Excellent posting! Thanks for sharing this.

focodave · Post by **focodave** » Mon Aug 19, 2013 9:53 am

azruss,
Good stuff.
Dave

fiat218 · Post by **fiat218** » Thu Aug 29, 2013 7:06 am

But,did it fix the issue?

azruss · Post by **azruss** » Thu Aug 29, 2013 9:28 pm

The last couple of time i took the car out, there was no clunking. It no longer pulls to the left. I can see a major improvement in the camber. I havent put a square and tape measure on it yet to see where i'm at. I've ordered new a-arms, so am waiting for those because a final assessment.

fiat218 · Post by **fiat218** » Thu Aug 29, 2013 9:30 pm

thats great news

v6spider · Post by **v6spider** » Sat Aug 31, 2013 2:00 am

Get a protractor level that's what I use to check camber and castor.. I'm building a jig for toe..

Rob

redone chassis shim.

redone chassis shim.

Re: redone chassis shim.

Re: redone chassis shim.

Re: redone chassis shim.

Re: redone chassis shim.

Re: redone chassis shim.

Re: redone chassis shim.

Re: redone chassis shim.