Brake caliper assembly assistance RESOLVED

[4uall]

Does anyone know the correct order on re-assembly of the brake caliper?

My guess is washer, brake hose, washer, retainer, brake hose union bolt

[divace73]

I'd say that is a good guess, a little hint I use, I anneal the copper for better sealing. Heating the washing in the end of a coat hanger (not the wooden ones) on a gas cook top till it's red hot, then drop it in a glass of water...

[SLOSpider]

The retainer is installed after you but the bolt in. And yes washer on each side. But you probably are driving already.

[4uall]

Thanks guys. No driving today -35*C

[narfire]

Thanks guys. No driving today -35*C

What.... you have to put away the beach vollyball nets that I saw on the news last week..
That temp is not normal for there either.... That cold front looks BIG.

Years ago (about 38) I had my 70 spider out in really cold weather (about -20 C or more ) and being young I did not change the oil from 20-50 and after a night out in that temp, was a bear to start. Sure enough the belt slipped and pranged a few valves.
Pissed, I kicked the rusty rocker panel putting a hole in it... Oh to be young again.... NOT