Well kinda! I have always hated those butt ugly late model bumpers so Yesterday I snatched 'em off! Auto Zone and Lowes had all I needed. 1x1/8 alu strip and 1x1/8 steel strip I had on hand. 2 amber LED clearance/marker lights that were 1x2, single wire. 2 pieces of Alu bent into L shape 5x5 and steel strip cut long enough to go from the 2 studs from the rubber bushings that go around the frt bumper shocks. Leg of alu L get sandwiched behind steel plate centered in opening,light gets bolted onto other leg in center of oval with ground wire ran to ground lug in engine bay,pwr wire gets soldered with male butt connector that fits female plug on harness. Totally adjustable in, out, up, down to put the light where you want it.
550 is the standard blinker relay and those won't work because there's not enough load now(thermal). Triton EL13 (Auto Zone )is electronic and HD,round so it fits the holder,makes a nice "click" and works perfectly. Plus it made in the US! (little pricey but worth it)
Taped off the lens and gave 'em a shot of satin black. NICE!
Total cost=about $20 bucks.
I've read and read about this subject and all I can say is there's more than one way to skin a cat.
Hmmmmm! 
Tadaaa!
So... that's how it works. 
Just took a few months to figure out how to post pics! 
