190 hp from down under!

So Cal Mark · Post by **So Cal Mark** » Mon May 23, 2011 11:29 pm

Here is a dyno video of a 2L Fiat TC using my 410fi stage 2 cams and distributorless ignition
190hp and 158 ft lbs of torque

http://www.youtube.com/watch?v=jZn2Nljt9mk

narfire · Post by **narfire** » Tue May 24, 2011 1:00 am

Impressive. What other mods were done to the engine do you know of? I have your FI cams as well but I don't believe I'm anywhere near 150+ HP but there is a marked(no pun intended) increase in performance.
Chris

So Cal Mark · Post by **So Cal Mark** » Tue May 24, 2011 1:02 am

I've asked the owner for the engine specs, but I know he's using dcoe carbs since the car is rhd. I'll post as soon as he sends me the details

sptcoupe · Post by **sptcoupe** » Thu Jun 09, 2011 3:01 pm

Mark - any updates? Those are really great results!

So Cal Mark · Post by **So Cal Mark** » Thu Jun 09, 2011 11:20 pm

custom pistons from JE with 12:1 cr, Chevrolet H beam con rods from Scat. 44mm intake valves, 38mm exhaust valves, extensive head porting and my 410fi camshafts along with my distributorless ignition system

sptcoupe · Post by **sptcoupe** » Fri Jun 10, 2011 8:03 am

Nice set up, and with those DCOEs I am not at all surpised with those results!

190 hp from down under!

190 hp from down under!

Re: 190 hp from down under!

Re: 190 hp from down under!

Re: 190 hp from down under!

Re: 190 hp from down under!

Re: 190 hp from down under!