Brake help

Maintenance advice to keep your Spider in shape.
User avatar
geospider
Patron 2020
Patron 2020
Posts: 581
Joined: Mon Mar 20, 2017 9:07 pm
Your car is a: 1979 Spider 2000
Location: concord, ca

Brake help

Postby geospider » Sat Sep 09, 2017 11:38 am

Trying to rebuild front calipers. having trouble getting piston out of the caliper. have heard about blowing out with compressed air: hard to get a seal. The pistons seem stuck solid; can't even easily push the pistons back in.
Ideas.
brakes worked OK prior to front end redo.
Thanks all.
Geo

Frog2Spider
Patron 2018
Patron 2018
Posts: 387
Joined: Thu Jun 19, 2014 6:48 pm
Your car is a: 1981 2000 Spider
Location: Vancouver, Washington

Re: Brake help

Postby Frog2Spider » Sat Sep 09, 2017 11:57 am

Soak them in a product called Blast, or diesel fuel. Yes, compressed air is the method commonly used.
A better idea, if the budget allows, buy new calipers.

Dave.
Always looking for curves under blue skies!
Frog2Spider

'81 - 2000 Spider

User avatar
lglade
Patron 2018
Patron 2018
Posts: 327
Joined: Sat Dec 07, 2013 7:05 am
Your car is a: 1984 Pininfarina
Location: Mukilteo, WA

Re: Brake help

Postby lglade » Sat Sep 09, 2017 1:42 pm

Mine were stuck too, and I used a BAS (big ass screwdriver) to carefully push the piston back into the caliper. And that movement loosened the piston enough that compressed air could pop it back out. But, be super-careful when using compressed air to remove the piston, and use a chunk of wood inside the opening of the caliper to 'catch' the piston as it comes out.

The piston will come out with a *bang* when the pressure finally overcomes friction, and there is enough energy TO SMASH OR REMOVE A FINGER :shock:. So insert the wood and wrap a shop towel around the caliper, then make sure your fingers are clear before hitting it with the air. Mine took 90+ psi to get the pistons out, but once they were out the rebuild process was a piece of cake.
Lloyd Glade- Mukilteo, WA
1984 Pininfarina Spider Azzurra
1962 Fiat 500D - wife's car
2015 Subaru Outback
2017 Ford Focus RS

User avatar
geospider
Patron 2020
Patron 2020
Posts: 581
Joined: Mon Mar 20, 2017 9:07 pm
Your car is a: 1979 Spider 2000
Location: concord, ca

Re: Brake help

Postby geospider » Sat Sep 09, 2017 2:26 pm

thanks, will give a try today. sprayed some blaster around the outside edge. hard part with the air is getting it sealed enough, esp if it takes that much pressure. I have read about the piston flying out. thanks for the safety reminder.
update as I go.

on the VERY positive side: head returned from machine shop: looks brand new with cam boxes on and lash all done. gotta love these shops that care about their work.

User avatar
lglade
Patron 2018
Patron 2018
Posts: 327
Joined: Sat Dec 07, 2013 7:05 am
Your car is a: 1984 Pininfarina
Location: Mukilteo, WA

Re: Brake help

Postby lglade » Sat Sep 09, 2017 3:42 pm

I have an air blow gun with a conical rubber tip and it seals up tightly against the caliper. You can pick one up at Harbor Freight for less than $10.
Lloyd Glade- Mukilteo, WA
1984 Pininfarina Spider Azzurra
1962 Fiat 500D - wife's car
2015 Subaru Outback
2017 Ford Focus RS

User avatar
geospider
Patron 2020
Patron 2020
Posts: 581
Joined: Mon Mar 20, 2017 9:07 pm
Your car is a: 1979 Spider 2000
Location: concord, ca

Re: Brake help

Postby geospider » Sat Sep 09, 2017 8:04 pm

Got them out. Yest quite the bang.
My Harbor freight did not have the rubber cone, so building up some duct tape (the universal tool) worked and they are now rebuilt.
Thanks you guys.

Geo

User avatar
lglade
Patron 2018
Patron 2018
Posts: 327
Joined: Sat Dec 07, 2013 7:05 am
Your car is a: 1984 Pininfarina
Location: Mukilteo, WA

Re: Brake help

Postby lglade » Sat Sep 09, 2017 9:08 pm

Cool and congratulations! :D
Lloyd Glade- Mukilteo, WA
1984 Pininfarina Spider Azzurra
1962 Fiat 500D - wife's car
2015 Subaru Outback
2017 Ford Focus RS

User avatar
MikeHynes
Posts: 51
Joined: Fri Sep 17, 2010 5:55 am
Your car is a: 1980 Spider 2000
Location: Central Il.

Re: Brake help

Postby MikeHynes » Sun Sep 24, 2017 6:18 pm

The easiest way to remove the pistons is to use the hydraulic pressure the brake system produces. You can simply remove the caliper and pads (without removing the brake lines) then carefully pump the brake pedal. Most often one piston will move first/farthest, use a c clamp to keep it from coming completely out until the other piston(s) are far enough out to come out easily with a little air pressure. Those buggers can be very tight, but not tight enough that the hydraulic pressure won't push them out.


Return to “General Maintenance”

Who is online

Users browsing this forum: No registered users and 16 guests