Fuel inline check valve

Maintenance advice to keep your Spider in shape.
dreavis
Posts: 111
Joined: Wed Apr 08, 2015 2:32 am
Your car is a: 1977 Fiat 1800

Fuel inline check valve

Postby dreavis » Wed Jun 14, 2017 2:16 am

(77' 1800) My check valve is leaking and need to replace it. I see a bunch online (non-OEM) and was wondering if anyone can recommend one they've used. Also, is there anything that must be considered when replacing this valve.
Thanks!

jagonza
Posts: 121
Joined: Mon Feb 01, 2016 12:03 pm
Your car is a: 1977 Fiat 124

Re: Fuel inline check valve

Postby jagonza » Wed Jun 14, 2017 7:15 am

i also have a 77 and had the original check valve leak. I assume you are talking about the one on the return line. it is two pieces pressed together and leaked where they came together.

Midwest Bayless has them

http://www.midwest-bayless.com/p-2621-b ... e-nos.aspx

i also put a generic one on the supply line near the tank

Frankly i can't even tell if they work, after a couple days the fuel still drains back to the tank.

if you are messing with fuel check valves it is a good time to add fuel filters , i have pre and post fuel pump
1977 Fiat 124 - Frankenstein engine
1999 VW Cabrio - Stock
1988 Fiero GT
And a couple of Daily Drivers

jagonza
Posts: 121
Joined: Mon Feb 01, 2016 12:03 pm
Your car is a: 1977 Fiat 124

Re: Fuel inline check valve

Postby jagonza » Wed Jun 14, 2017 7:20 am

sorry wrong link above this is the link

http://www.midwest-bayless.com/fiat-x19 ... ia-oe.aspx
1977 Fiat 124 - Frankenstein engine
1999 VW Cabrio - Stock
1988 Fiero GT
And a couple of Daily Drivers

dreavis
Posts: 111
Joined: Wed Apr 08, 2015 2:32 am
Your car is a: 1977 Fiat 1800

Re: Fuel inline check valve

Postby dreavis » Wed Jun 14, 2017 2:19 pm

Thanks. I saw those no Midwest, but the one for my year ws out of stock (i'll check again). Is there something special about this particular valve or would a different check valve work?

jagonza
Posts: 121
Joined: Mon Feb 01, 2016 12:03 pm
Your car is a: 1977 Fiat 124

Re: Fuel inline check valve

Postby jagonza » Thu Jun 15, 2017 9:38 am

i dont think there is anything special, i think the break pressure was like 0.5 psi.
1977 Fiat 124 - Frankenstein engine
1999 VW Cabrio - Stock
1988 Fiero GT
And a couple of Daily Drivers

dreavis
Posts: 111
Joined: Wed Apr 08, 2015 2:32 am
Your car is a: 1977 Fiat 1800

Re: Fuel inline check valve

Postby dreavis » Mon Jul 31, 2017 2:41 pm

It has been recommended to me by a reliable source that I simply remove the check valve altogether. I am fine with following this advice, but I have also seen new check valves online for around $8-20. I assume one of these would do the job if it is the correct size (it fits the fuel lines). Has anyone replaced the old one with a modern one, or has anyone who has removed the check valve altogether noticed any difference from not having one? Just curious.

Thanks!

dreavis
Posts: 111
Joined: Wed Apr 08, 2015 2:32 am
Your car is a: 1977 Fiat 1800

Re: Fuel inline check valve

Postby dreavis » Tue Aug 29, 2017 2:13 am

Quick Update. I purchased a new part through Midwest Bayless and installed it. Leaks and the car runs great. It also seems to start after a crank or two after sit for while. It used to take longer to start and run. Part with shipping about $25


Return to “General Maintenance”

Who is online

Users browsing this forum: No registered users and 16 guests