Veneer on dash panels on my '81

What sets your Spider apart from the rest?
User avatar
rjkoop
Posts: 976
Joined: Thu Nov 08, 2012 6:45 am
Your car is a: 1981 Fiat Spider
Location: Ottawa, Ontario, Canada

Veneer on dash panels on my '81

Postby rjkoop » Sat Feb 25, 2017 8:42 am

Have a few days of nice weather and was getting the itch to do a bit of work on the car. Considering veneering my dash/shifter cover 'wood' pieces. Never liked the original look. Some nice posts on how to do this.

http://www.fiatspider.com/f15/viewtopic.php?f=3&t=27386&hilit=thickness+dash+wood

http://www.fiatspider.com/f15/viewtopic.php?f=30&t=34982&p=269641&hilit=marine+veneer#p269641

I have this steering wheel which I got from Allison's automotive.

Image

I'd like to try to match the wood look/color but not sure how to determine what would match best. I assume I should look for a veneer that is similar in color. Maybe the classic mahogany in this pic.

Image

I have some of the West system epoxy and was hoping to apply the veneer to the existing wood pieces (using the procedures in the links above) and then applying the epoxy to give it a nice shine. There are some posts on here that indicate it might be the way to go.

http://www.fiatspider.com/f15/viewtopic.php?f=3&t=27386&p=219602&hilit=west+epoxy+system#p219602

Any thoughts our comments would be much appreciated.

Richard

ideashappen
Posts: 38
Joined: Sat Jun 13, 2015 10:16 pm
Your car is a: 1980 spider 2000

Re: Veneer on dash panels on my '81

Postby ideashappen » Sat Feb 25, 2017 10:03 am

It looks like mahogany.
Mine was mahogany and I redid my dash with mahogany laminate. It turned out beautiful.
It only cost me 100$ for the guy to supply the laminate, hydraulically press glue , cut out the holes and sand it down. I have a 1980 so I did the cluster panel, little panel beside it, and the glove compartment on both sides. I did in it in Montreal. I did the semi gloss lacquer myself. If you want I could both post some pics and send you the information for the guy who did it. This year , time willing, will do the shifter plate and the radio portion.

User avatar
rjkoop
Posts: 976
Joined: Thu Nov 08, 2012 6:45 am
Your car is a: 1981 Fiat Spider
Location: Ottawa, Ontario, Canada

Re: Veneer on dash panels on my '81

Postby rjkoop » Sat Feb 25, 2017 2:22 pm

ideashappen wrote:It looks like mahogany.
Mine was mahogany and I redid my dash with mahogany laminate. It turned out beautiful.
It only cost me 100$ for the guy to supply the laminate, hydraulically press glue , cut out the holes and sand it down. I have a 1980 so I did the cluster panel, little panel beside it, and the glove compartment on both sides. I did in it in Montreal. I did the semi gloss lacquer myself. If you want I could both post some pics and send you the information for the guy who did it. This year , time willing, will do the shifter plate and the radio portion.


I'd love to see a new pics if you have them.

Went to Lee Valley Tools, looked at all the pieces of veneer and it matched the mahogany best. So I bought that.

Going to do it myself I think. I'll do a test piece, try with epoxy but will probably go with lacquer since I was told the epoxy will fade with UV rays so either cover the epoxy with lacquer or just do lacquer. If the color doesn't quite match the steering wheel I'll stain it before applying the lacquer.

Thanks for the info.

Richard

ideashappen
Posts: 38
Joined: Sat Jun 13, 2015 10:16 pm
Your car is a: 1980 spider 2000

Re: Veneer on dash panels on my '81

Postby ideashappen » Sat Feb 25, 2017 11:19 pm

Ok cool...... When I get home on Monday night I'll Pull up the pics and post them for you.
:)

User avatar
aj81spider
Patron 2020
Patron 2020
Posts: 1526
Joined: Fri Mar 11, 2011 9:04 am
Your car is a: 1974 Fiat 124 Spider
Location: Chelmsford, MA

Re: Veneer on dash panels on my '81

Postby aj81spider » Sun Feb 26, 2017 7:48 am

I used spar varnish to finish my dash. I thought it came out as good as laquer and it is a marine grade that will hold up to the elements better.
A.J.

1974 Fiat 124 Spider
2006 Corvette
1981 Spider 2000 (sold 2013 - never should have sold that car)

davery
Posts: 804
Joined: Sun Apr 15, 2012 8:51 pm
Your car is a: 1985 Spider
Location: Ohio

Re: Veneer on dash panels on my '81

Postby davery » Sun Feb 26, 2017 9:07 am

I did mine last summer.
Image
Image
Don Avery
Dayton, OH/Sarasota,FL
1985 Pininfarina
2011 Eos
2012 Mercedes E550 Cabriolet

spider2081
Patron 2024
Patron 2024
Posts: 2967
Joined: Fri Jan 27, 2006 11:45 pm
Your car is a: 1981 Spider 2000
Location: Wallingford,CT
Contact:

Re: Veneer on dash panels on my '81

Postby spider2081 » Sun Feb 26, 2017 4:24 pm

I like it Don great choice of colors and grain.

User avatar
RRoller123
Patron 2020
Patron 2020
Posts: 8179
Joined: Sun Nov 13, 2011 2:04 pm
Your car is a: 1980 FI SPIDER 2000
Location: SAGAMORE BEACH, MA USA

Re: Veneer on dash panels on my '81

Postby RRoller123 » Mon Feb 27, 2017 5:48 am

aj81spider wrote:I used spar varnish to finish my dash. I thought it came out as good as laquer and it is a marine grade that will hold up to the elements better.


Agreed, spar varnish will hold up to the environment, and you can get a pretty good shine with some wax, after it has had plenty of time to stabilize. (But it will never get as reflective as those lacquer finishes!) It never fully cures to a hard surface. That is the beauty of it, stays a little flexible to allow for movement without cracking.

Pete
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle

User avatar
rjkoop
Posts: 976
Joined: Thu Nov 08, 2012 6:45 am
Your car is a: 1981 Fiat Spider
Location: Ottawa, Ontario, Canada

Re: Veneer on dash panels on my '81

Postby rjkoop » Mon Feb 27, 2017 7:35 am

Made good progress. Used contact cement (veneer manufacturers recommendation), let it sit for 15 mins and then carefully stuck veneer to scuffed up dash pieces, rolled to ensure it was even and then sandwitched between 2 MDF boards and clamped it down for 30 mins. Worked great and was easy to trim off the edges and gauge holes with a sharp exacto knife.

Next going to do apply epoxy and/or lacquer on a test piece and see how the color comes out. Gut feel is that I'll need a stain followed by lacquer to match the beautiful color/shine on the steering wheel.

I'll post some pictures soon and of course of the final product.

User avatar
rjkoop
Posts: 976
Joined: Thu Nov 08, 2012 6:45 am
Your car is a: 1981 Fiat Spider
Location: Ottawa, Ontario, Canada

Re: Veneer on dash panels on my '81

Postby rjkoop » Mon Feb 27, 2017 8:22 am

davery wrote:I did mine last summer.
Image
Image


Nice. Pics from others who have done this are definitely inspiring.

User avatar
rjkoop
Posts: 976
Joined: Thu Nov 08, 2012 6:45 am
Your car is a: 1981 Fiat Spider
Location: Ottawa, Ontario, Canada

Re: Veneer on dash panels on my '81

Postby rjkoop » Mon Feb 27, 2017 8:26 am

aj81spider wrote:I used spar varnish to finish my dash. I thought it came out as good as laquer and it is a marine grade that will hold up to the elements better.


I'll take a look at that spar varnish. Looks like it may be the right thing to use.

User avatar
rjkoop
Posts: 976
Joined: Thu Nov 08, 2012 6:45 am
Your car is a: 1981 Fiat Spider
Location: Ottawa, Ontario, Canada

Re: Veneer on dash panels on my '81

Postby rjkoop » Mon Feb 27, 2017 8:18 pm

So far so good...

Image

Image

And I tested the color change with some varnish I had lying around. Pretty good match.

Image
Last edited by rjkoop on Sat May 12, 2018 8:04 am, edited 3 times in total.

User avatar
RRoller123
Patron 2020
Patron 2020
Posts: 8179
Joined: Sun Nov 13, 2011 2:04 pm
Your car is a: 1980 FI SPIDER 2000
Location: SAGAMORE BEACH, MA USA

Re: Veneer on dash panels on my '81

Postby RRoller123 » Tue Feb 28, 2017 7:28 am

That is gunna look wickhud pissah!
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle

pwilliam
Posts: 174
Joined: Fri Nov 02, 2012 4:30 pm
Your car is a: 1972 124 Sport Spider

Re: Veneer on dash panels on my '81

Postby pwilliam » Tue Feb 28, 2017 3:44 pm

yeah guy, whickud!

User avatar
rjkoop
Posts: 976
Joined: Thu Nov 08, 2012 6:45 am
Your car is a: 1981 Fiat Spider
Location: Ottawa, Ontario, Canada

Re: Veneer on dash panels on my '81

Postby rjkoop » Tue Feb 28, 2017 3:57 pm

1st coat of varnish on. It's amazing how it brings out the grain of the mahogany.

Image

Image
Last edited by rjkoop on Thu Nov 02, 2017 7:18 pm, edited 1 time in total.


Return to “Custom Stuff”

Who is online

Users browsing this forum: No registered users and 16 guests