Oil Pressure Sensor Question

Keep it on topic, it will make it easier to find what you need.
budzinsk
Posts: 55
Joined: Mon Dec 29, 2014 2:55 pm
Your car is a: 1984 Fiat Spider

Oil Pressure Sensor Question

Postby budzinsk » Sun Jan 07, 2018 2:27 pm

Hi Everyone. I ordered a new Oil Pressure Gauge sensor for my spider, and I went to install it today and there is a copper wire coming out of the hole where the oil goes in. Before I contact the supplier, I just wanted to see if this is normal? The original one did not have this, nor have any others I have seen. Thanks in advance.

ImageSpider OP Sensor by budzinsk, on Flickr

redauto
Posts: 20
Joined: Sun Jul 05, 2009 12:19 pm
Your car is a: 1980 fiat spider auto
Location: Texas

Re: Oil Pressure Sensor Question

Postby redauto » Sun Jan 14, 2018 5:03 pm

budzinsk wrote:Hi Everyone. I ordered a new Oil Pressure Gauge sensor for my spider, and I went to install it today and there is a copper wire coming out of the hole where the oil goes in. Before I contact the supplier, I just wanted to see if this is normal? The original one did not have this, nor have any others I have seen. Thanks in advance.

ImageSpider OP Sensor by budzinsk, on Flickr

the switches com with that wire. do not remove it.

Jay
1985 fiat spider auto
driven fiats since 1972
www.spiderroadster.com

budzinsk
Posts: 55
Joined: Mon Dec 29, 2014 2:55 pm
Your car is a: 1984 Fiat Spider

Re: Oil Pressure Sensor Question

Postby budzinsk » Mon Jan 15, 2018 8:30 am

Thanks. I did contact the supplier and it is correct to have the wire in there. Thank you!


Return to “Engine and Tuning”

Who is online

Users browsing this forum: No registered users and 17 guests