Cam Timing Specs. for Stock 2.0L Cams

Keep it on topic, it will make it easier to find what you need.
kmoses
Posts: 366
Joined: Thu Sep 11, 2014 10:28 pm
Your car is a: 1979 Spider 2000

Cam Timing Specs. for Stock 2.0L Cams

Postby kmoses » Thu Apr 20, 2017 9:28 am

I am looking for the specs. that tell where the stock cams should be ( in degrees °) when the engine piston #1 is at TDC. I found the following information "It is critical to mark the cams for full lift, and the correct position for timing with crankshaft at TDC. Degree wheel used to find exact point of peak lift and position for correct timing with engine". I can find peak lift, but the where exactly should each stock cam be positioned in relation with the crank at TDC? The cams are stock 2.0L spider cams.

User avatar
blazingspider
Posts: 173
Joined: Mon Jan 28, 2013 8:44 am
Your car is a: 1977 fiat spider
Location: Nanuet, New York

Re: Cam Timing Specs. for Stock 2.0L Cams

Postby blazingspider » Thu Apr 20, 2017 12:06 pm

Everything you want to know is in this this thread.

http://forum.abarth-gmr.be/index.php?topic=786.0

kmoses
Posts: 366
Joined: Thu Sep 11, 2014 10:28 pm
Your car is a: 1979 Spider 2000

Re: Cam Timing Specs. for Stock 2.0L Cams

Postby kmoses » Thu Apr 20, 2017 3:31 pm

That was exactly the information I needed. Thank you!


Return to “Engine and Tuning”

Who is online

Users browsing this forum: No registered users and 24 guests