Lada style 5th gear for coupe

Keep it on topic, it will make it easier to find what you need.
karhawk
Posts: 150
Joined: Wed Oct 08, 2008 8:13 pm
Your car is a: 81 spider

Lada style 5th gear for coupe

Postby karhawk » Fri Mar 10, 2017 4:04 pm

Looking for freeway 5th gear for a spider trans. I think the Lada 5 speed has a freeway friendly 5th gear and cluster.
Thanks
Chris
Oakland, ca.

djape1977
Posts: 985
Joined: Sat Apr 21, 2012 6:08 pm
Your car is a: 1970 fiat 124bc
Location: Belgrade, Serbia, eastern Europe

Re: Lada style 5th gear for coupe

Postby djape1977 » Fri Mar 10, 2017 8:18 pm

lada 5th gear doesn't fit 124 gearbox.
it would take some serious machining to make it fit.

vandor
Posts: 3996
Joined: Sat May 23, 2009 1:23 pm
Your car is a: 1971 124 Spider
Location: Texas, USA

Re: Lada style 5th gear for coupe

Postby vandor » Fri Mar 10, 2017 11:57 pm

And the Lada gearbox does not fit the Spider, the shifter comes out much farther forward. It can be made to fit, but either the console has to be hacked up, or a weird, long, custom made shifter has to be used.
Csaba
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town

karhawk
Posts: 150
Joined: Wed Oct 08, 2008 8:13 pm
Your car is a: 81 spider

Re: Lada style 5th gear for coupe

Postby karhawk » Sat Mar 11, 2017 10:54 am

Looking to get a "Lada style" long 5th gear but made for a spider box we are rebuilding. But I'm getting the impression that these parts are hard to find and priced accordingly.

Chris
Oakland, Ca.

djape1977
Posts: 985
Joined: Sat Apr 21, 2012 6:08 pm
Your car is a: 1970 fiat 124bc
Location: Belgrade, Serbia, eastern Europe

Re: Lada style 5th gear for coupe

Postby djape1977 » Wed Mar 15, 2017 6:57 am

it's been quite a while since they were last produced. nearly impossible to find nowdays.
as i said in other topic, i still have couple of those gear pairs left but i'm not willing to sell them at this time since i need them for my customer's gearboxes. i have advertised rebuilt gearboxes with taller 5th on couple occasions and they get sold quickly.
i'm in the middle of process of getting those gears newly made, but as you may imagine, it's not a simple process, and not a cheap one to add.
in order for it to be done right, i need to get a batch of gears machined and then properly heat treated. either of these steps gets more complicated and more expensive smaller the quantity is. big serious manufacturers don't want to bother if it's not tens of thousands of units, and small manufacturers don't have the equipment to do the proper job. regarding quantities, how many of fiat 124 owners would like to have taller fifth, and how many are actually going to buy it and install it? couple hundred at best.


Return to “Engine and Tuning”

Who is online

Users browsing this forum: No registered users and 35 guests