1979 Spider in Atlanta, Reluctant Restoration

This is the place to discuss restoration problems, post questions or projects-complete or partial.
KeithM
Posts: 10
Joined: Fri Apr 28, 2017 10:46 am
Your car is a: 1979 Fiat Spider 2000

1979 Spider in Atlanta, Reluctant Restoration

Postby KeithM » Tue May 02, 2017 2:51 pm

I met some of you already in the New Members section, thank you for saying hello.

My Spider came to its new home at my house last week and I was pretty excited to rewire it, redo the cooling, ignition and fuel systems and then get it back on the road. Sure it needed some bodywork, but nothing so bad it couldn't be done in a couple of weekends. That's what I thought anyway. While extracting the old wiring harness I pulled the seats and carpet to make it easier to remove, and found out just how bad the floors were:

Image

Image

So I'm a bit disappointed since there's more work to do than I had planned (always the case for me anyway). I'm in the middle of a frame-off restoration on a 1973 IH Scout, so the Fiat was supposed to be a 3-4 week project that will turn out to be much more than that (and the Scout will continue to wait, while my friends clutch their sides with laughter at me having taken on yet another project that they wouldn't even consider). But anything can be fixed, including this. By my estimation I'll need at least all four floor panels and the seat supports. I haven't had a chance to evaluate the underside but will likely need the floor pan supports as well.

It looks like replacement pieces are available from a few different vendors, all of which seem to have mixed reviews with respect to fit, finish, steel quality and service. If you've redone your floor to this extent please comment on the parts you bought and your experience installing them.

Fiatlanta
Posts: 184
Joined: Fri Jul 08, 2016 6:00 am
Your car is a: 1979 Spider 124

Re: 1979 Spider in Atlanta, Reluctant Restoration

Postby Fiatlanta » Fri May 05, 2017 10:42 am

Are the floor panels separate pieces? Or do you have to cut them out and weld back in?

Looks like a lot of work. good luck.

User avatar
chrisg
Posts: 746
Joined: Sun Jun 04, 2006 7:30 am
Your car is a: 1971 FIAT

Re: 1979 Spider in Atlanta, Reluctant Restoration

Postby chrisg » Fri May 05, 2017 11:15 am

they will be separate pieces soon it appears. from my limited experience with very rusty 124s & completely rebuilding a rusted out floor on a 124 Coupe, I'd say the flat parts are rather simple & forgiving, especially if you do not plan on entering car shows with lights & mirrors underneath to show off the virgin underbelly of your car (and, hell, even if you were...). The more significant part(s) are the connection point for the long trailing arms (along the cross member at the leading edge of the rear seat, under the car) and any damage that may have crept into the rocker assemblies. Good luck. Save another one!
Chris Granju
Knoxville, TN
'71 FIAT 124BS (pretty), '72 FIAT 124BC,'76 FIAT 128 Wagon(ratbeast), '85 Bertone X 1/9, '70 124BC (project), 79 X1/9 (hot rod in rehab), '73 124BS (2L, mean), '74 124 Special TC, '73 124CS, '73 124 Familiare

User avatar
RRoller123
Patron 2020
Patron 2020
Posts: 8179
Joined: Sun Nov 13, 2011 2:04 pm
Your car is a: 1980 FI SPIDER 2000
Location: SAGAMORE BEACH, MA USA

Re: 1979 Spider in Atlanta, Reluctant Restoration

Postby RRoller123 » Fri May 05, 2017 3:44 pm

And that cross member at the rear floor area is critical too, it looks like it may have a couple of holes in it?
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle

KeithM
Posts: 10
Joined: Fri Apr 28, 2017 10:46 am
Your car is a: 1979 Fiat Spider 2000

Re: 1979 Spider in Atlanta, Reluctant Restoration

Postby KeithM » Mon May 15, 2017 2:06 pm

Yes, the parts I'll be replacing are:

Floor pans (there are 4: drivers front and rear, passenger front and rear). I believe I can bend these with my sheet metal brake without too much trouble

All 4 seat brackets

Floor cross member

Rear sill

I'm not looking forward to it at all.

cabanabob
Patron 2021
Patron 2021
Posts: 12
Joined: Wed Feb 03, 2010 6:40 pm
Your car is a: 1975 Fiat Spider And 1977 Fiat Spider

Re: 1979 Spider in Atlanta, Reluctant Restoration

Postby cabanabob » Tue Jan 15, 2019 10:14 am

Hey Keith, How did your floors turn out?

User avatar
basso
Posts: 72
Joined: Fri Nov 09, 2012 8:57 pm
Your car is a: 1981 Fiat 124 Spider 2000

Re: 1979 Spider in Atlanta, Reluctant Restoration

Postby basso » Tue Jan 15, 2019 11:42 am

KeithM wrote:I'm not looking forward to it at all.


Ha! I know exactly what you mean - my restauration started with the wheel arch corner in the front and ended in an actual 6 years restauration process ;(

I v'e replaced nearly all critical metal parts and like to give You one advise: Buy original pininfarina replacing parts for the body - they are expensive but you'll turn nuts when a replacement is not correct in shape and needs two days of Your attention to fit into your car - it is demotivating. Do not trust them when sellers explain that their parts are "plug and play". I tried a lot of parts...

I hope Your firewall is ok, it can't be bought and you'll have to make one from scratch.. a lousy loud adventure ( i posted some photos in my restaurations thread). If You like to cut out the crossmember consider welding an holding-frame to Your Body to pervent warping ( is that correct english ? ).

I'm looking forward to read in your posts you did it ;)
Basso

DRUMMOND
Patron 2018
Patron 2018
Posts: 443
Joined: Thu Oct 20, 2011 11:11 pm
Your car is a: Fiat Spyder 2000 1980 Pininfarina

Re: 1979 Spider in Atlanta, Reluctant Restoration

Postby DRUMMOND » Thu Jan 17, 2019 10:02 pm

Hi KeithM

This started with a small rust bubble, but ended well. Just for encouragement :D
Image
Image
Image


Return to “Restoration Projects”

Who is online

Users browsing this forum: No registered users and 48 guests