Prima Brake Install Problem

General chat about the car goes in here.
Frog2Spider
Patron 2018
Patron 2018
Posts: 387
Joined: Thu Jun 19, 2014 6:48 pm
Your car is a: 1981 2000 Spider
Location: Vancouver, Washington

Prima Brake Install Problem

Postby Frog2Spider » Tue May 09, 2017 10:24 pm

Help!
The problem is with the steel brake lines that were supplied. The vendor has assured me that they are correct, but I can not figure how they possibly could be.
The calipers have a round arch cut out, while the bango fitting on the end of the steel brake line is a square cube.
Following their directions, I see no way that this line can fit properly. Plus the lines supplied are about 3 1/2" longer than the originals.
Either these are the wrong lines, or I'm not 'getting' how they are to be connected.
An option on the lines, and a picture of the connection if they are correct, would be very helpful.

Thanks,
Dave
Always looking for curves under blue skies!
Frog2Spider

'81 - 2000 Spider

Frog2Spider
Patron 2018
Patron 2018
Posts: 387
Joined: Thu Jun 19, 2014 6:48 pm
Your car is a: 1981 2000 Spider
Location: Vancouver, Washington

Re: Prima Brake Install Problem

Postby Frog2Spider » Wed May 10, 2017 4:11 pm

Problem solved.

Dave.
Always looking for curves under blue skies!
Frog2Spider

'81 - 2000 Spider


Return to “Fiat Spider Related”

Who is online

Users browsing this forum: No registered users and 7 guests