K&N Filter

Make it go fast! Kick it up a notch. Post tips in here.
Mark_vaughn

K&N Filter

Postby Mark_vaughn » Mon Jul 31, 2006 10:54 am

I am thinking of replacing the existing air filter/holder with an 11" K&N filter assembly. I will have to fabricate a base plate for it to sit on, but that shouldn't be too hard and would fit in the stock place. This and a free flow exhaust would be the only modifications to the stock 1800 engine.

Just wondering if anyone has done this or something similar and how it turned out. Increased power? Would you recommend it or not?

Gerard Del Monte

Postby Gerard Del Monte » Tue Aug 01, 2006 1:55 am

It has been done before, and is generally recommended... anything that free up breathing is good. It seems to be especially effective on FI cars.

bandit

Postby bandit » Tue Aug 01, 2006 2:40 pm

I have a K&N on my FI car works great with a few other mods
as well I'm running pretty good about 130 to 140 HP ...


Dan

Gerard Del Monte

Postby Gerard Del Monte » Tue Aug 01, 2006 11:14 pm

Dan- I am VERY curious to know what mods you did to get that kind of HP, that's the range I would shoot for on my FI car when I next throw money at the engine. What did you do? Did you dyno it?

bandit

Postby bandit » Wed Aug 02, 2006 3:02 am

Port Head HC Pistons Cams Port Intake Manifold
header K&N Filter Exhaust System on the most part
thats what has been done .

Dan

Mark_vaughn

Postby Mark_vaughn » Wed Aug 02, 2006 10:35 am

bandit wrote:Port Head HC Pistons Cams Port Intake Manifold
header K&N Filter Exhaust System on the most part
thats what has been done .

Dan


What cam did you use? IAP told me the Autocross Cam is too hot for the street, which made me want it more.

bandit

Postby bandit » Wed Aug 02, 2006 10:44 pm

The auto cross cams would be close to what i am running and no
there not to hot for the street you will end up with a little lope in
the idle big deal . Your power band will be higher in the RPM range
but around 3000 RPM it will start to pull once you hit 5 even harder
so you'll lose some low end but these engine dont have much
any ways . The TC loves RPM thats what makes them run good
not low end torqe .
Most people when it comes to building a street TC they feel you need
to keep it very mild well the auto cross cams aren't really that much
more from a hot street cams just bump it up there not even a race
cam in my option !

Dan

Joe Clemente
Posts: 151
Joined: Wed Jan 25, 2006 1:35 am
Location: Vancouver, B.C. CANADA

Postby Joe Clemente » Thu Aug 03, 2006 12:57 am

IAP uses that standard line with their cam sales to cover their asses. The autocross cams as Dan said are not too hot at all for the street. They're great cams. HOWEVER, autocross cams don't work well with stock FI. And I suspect that is probably what they meant by "too hot". They need better induction and compression to get the most out of them.

User avatar
mdrburchette
Posts: 5754
Joined: Wed Jan 25, 2006 5:49 am
Your car is a: 1972 Fiat 124 Sport
Location: Winston-Salem, NC

Postby mdrburchette » Thu Aug 03, 2006 7:58 am

I upped the comp on my 1608 to 9:8, ported and polished the head, original 4-2-1 exhaust and 42/82 cams with dual 40 idf's. It idles smooth with no loping, accelerates smooth with decent bottom end torque, but you can actually feels a kick in the pants around 4K. Fun, fun, fun! :D
Next step is to open up the exhaust and play with jetting and see what happens.

yap123
Posts: 100
Joined: Thu Mar 02, 2006 12:39 am
Location: Irvine, CA

Postby yap123 » Wed Aug 09, 2006 8:05 pm

Hi,

Which gears will I notice the increase in power with the K & N filter - 2nd, 3rd, 4th or 5th? Will it be noticeable or just a slight increase?

Thanks,
Clint

bandit

Postby bandit » Thu Aug 10, 2006 12:37 am

The K&N a lone will not big a big boast in power just a bit maybe a
couple HP differnce so you might feel it you might not if any thing
it would be in the Higher RPM range maybe 5000 and up in all the
Gears .

Dan

mbouse

Postby mbouse » Thu Aug 10, 2006 1:04 pm

Good luck getting a substantially measurable increase in performance JUST by changing the breather.

Yes, it is a step, a PART of a performance upgrade - but if it were that simple -

You will enjoy the change in motor music!


Return to “Performance”

Who is online

Users browsing this forum: No registered users and 28 guests